 |
| Galaxy Star Pro S7262 |
Samsung Galaxy Star Pro with dual SIM certificate slots (GT-S7262) has conventional a contemporary Android 4.1.2 Jelly Bean bring up to date with firmware build come to S7262DXUANA3. The contemporary legitimate firmware is without hesitation open as an Over-The-Air (OTA) bring up to date as well as through Samsung KIES.
Firmware details
PDA: S7262DXUANA3
CSC: S7262OLBANA1
MODEM: S7262DXUAMJ2
Version: Android 4.1.2
Build date: Jan 27, 2014
Regions: Indonesia, Philippines, Thailand
Samsung Galaxy Star Pro S7262 users who missed the OTA bring up to date notification or unable to access the bring up to date finished Samsung KIES, can without hesitation download and install the same manually using our step-by-step conductor.
Pre-requisites
1. Install
USB Drivers for Samsung Galaxy Star Pro on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Star Pro should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.1.2 DXUANA3 Jelly Bean firmware is compatible only with the Samsung Galaxy Star Pro (GT-S7262). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Star Pro by navigating to Settings >> About Phone.
Files Required
1.
Android 4.1.2 DXUANA3 Jelly Bean Firmware (Mirror
Link) for Galaxy Star Pro S7262
2.
Odin 3.07
Steps to Update Galaxy Star Pro S7262 with Android 4.1.2 DXUANA3 Jelly Bean Firmware
Step 1: Extract Firmware zip file using
WinRAR/
7-Zip/
WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Star Pro.
Step 4: Boot the device into Download Mode by pressing and holding
Volume Down,
Home and
Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the
Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Star Pro to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Step 7: Select the following files in Odin from extracted S7262DXUANA3 firmware folder:
- Click the PDA button and select the .tar.md5 file.
- Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
- Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
- Click the PIT button and select the .pit file. Ignore if there is no such file.
Step 8: In Odin, enable
Auto Reboot and
F. Reset Time checkboxes. Also, ensure the
Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the
Start button to begin the installation process.
Step 10: Once the installation process is completed, your phone will restart and soon you will see a
PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.
Samsung Galaxy Star Pro S7262 should be now updated with Android 4.1.2 DXUANA3 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.
Note: If Galaxy Star Pro S7262 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.
Note: Here Is Link To Download the File ROM =
The File size is 133 MB, so I split the file into 3 parts :
To combine 3 parts files above into 1 file just use WINRAR, then extract the files into ZIP format.
If any problem with the file, maybe because the file have corrupted during the download process, you can try to re-download the file.
Tutorial Video : Easy Way To Download at downloadsafe.org/sharecash.org =
Title : How to Update Galaxy Star Pro S7262 with Android 4.1.2 DXUANA3 Jelly Bean Official Firmware
Description : Galaxy Star Pro S7262 Samsung Galaxy Star Pro with dual SIM certificate slots (GT-S7262) has conventional a contemporary Android 4.1.2...